From metal shaping to tool sharpening, the G8 Bench Grinder provides a wide array of production-ready uses for your workshop. Designed with dual speeds, and a wide base for extra stability, you will be amazed at the sharpening precision with every use. Enhance your workshop production with our top of the line Bench Grinder.’

Specifications

Motor AC Induction | 5/8 Arbor | R/L wheel nuts

Power Low Speed | 1.8 Amp | 1/3 HP

High Speed | 3.1 Amp | 1/2 HP

Voltage 110-120 volt

Frequency 60 Hz

Wheel Speed Low Speed | 1750 RPM | No Load

High Speed | 3590 RPM | No Load

Wheel Size 8 Diameter | 1 Width | 5/8 Arbor

Wheel Grit Coarse | 60 Grit | White Aluminum

Fine | 120 Grit | Oxide

Max Wheel Speed 3600 RPM

Speed Switch 3-position | L (Low) – O (Off) – H (High)

Work Light Built-in LED Light | Wired In | No 2nd Plug Needed

Wheel Flanges Precision machined sintered metal wheel flange greatly improves balance of grinding wheels

Eye Shields Standard | 3x Magnifying | Position & angle adjustable

Tool Rests Extra Wide | Cast Aluminum | No Detent