Fischer Wedge Anchor M8X80 (WA)(45789)(50pc/Box) | Model: WA-F0880
Fischer Wedge Anchor M8X80 (WA)(45789)(50pc/Box) | Model: WA-F0880
Fischer Wedge Anchor M8X80 (WA)(45789)(50pc/Box) | Model:WA-F0880Specification: Drill diameter (d0)8 mmMin. drill hole depth for through fixings (h2)80 mmAnchor length (l)80 mmWidth across nut13 mmPackagingFolding boxAmount50 pcs.Applications:Steel constructionsGuard railsConsolesLaddersCable traysMachinesStaircasesGatesFaadesFunctionality:The FWA is suitable for pre-positioned and push-through installation.Prior to installation,...
Fischer Wedge Anchor M8X80 (WA)(45789)(50pc/Box) | Model:WA-F0880
Specification:
| Drill diameter (d0) | 8 mm |
| Min. drill hole depth for through fixings (h2) | 80 mm |
| Anchor length (l) | 80 mm |
| Width across nut | 13 mm |
| Packaging | Folding box |
| Amount | 50 pcs. |
Applications:
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Gates
- Faades
Functionality:
- The FWA is suitable for pre-positioned and push-through installation.
- Prior to installation, place the hex nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hex nut).
- When the torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
Advantages:
- The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
- The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
- Available with metric and imperial threads
There are no reviews yet.
Related Products
There are many variations of passages of Lorem Ipsum available
