Advanced polymer formulation
with unparalleled bonding strength

• No substrate priming required
• Ready to use no mixing or dilution
• Low consumption 5m2 per tub
• BW1 is designed for the professional tradesperson but incredibly easy to install.
  Apply BW1 using a paint brush and foam roller, directly from the bucket it is
  supplied in. Corners and joints can be coated using a paint brush to create firm contact with the substrate.
• Then use a foam roller to apply TWO coats of BW1 to
  the remainder of the space, one horizontally and one vertically. This will ensure a fully water-tight covering.
  Note: It is important that the second coat is applied 1 – 2 hours after the first coat. If the second coat is applied after this time, it may not adhere fully to the first coat
• VOC and solvent free
• Use on multiple substrates
• Incredibly easy to install