Reed Mfg PLAS2PE PLAS In-Line Rotary Pipe Cutter, 14″-18″ PE, HDPE

PLAS In-Line Rotary Cutters are excellent for cutting PVC or PE pipe in trench or above ground. Each PLAS rotary cutter needs just 6 to 8 (153 – 203 mm) clearance around the pipe, making them easy to operate in trench and with lower prep costs. Outboard rollers keep the cutter aligned on pipe, ensuring a square cut every time. Each PLAS cutter also can produce, in-line with the cut, a 15 bevel on both sides of the pipe using bevel blade*.For cutting PE pipe**, REED developed a hardened, tool steel blade for best cutting results. The engineered blade tip drives chips out of the way while cutting PE. PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternate

*Bevel bladeincluded with PVC models 04470, 04475, 04480 and 04485; can also be added to PE models. Contact

**PLAS Cutter Specific Limitations for PE:
up to 14″ pipe (355 mm) – 2″ (51 mm) wall thickness
up to 18″ pipe (500 mm) – 1 1/2″ (38 mm) wall thickness
up to 28″ pipe (800 mm) – 1″ (25.4 mm) wall thickness

• Safe to use as it creates no dust and chips fall where they are cut; chipsare not blownfar into pipe.
• Only 6″-8″ clearance needed to turn cutter around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• If the job requires a bevel on PE, add REED bevel bladeto simultaneously cut and bevel.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use.
• Pipe Capacity: 14-18″
• Application: PE, HDPE
• Weight: 57 lb